Network Technologies DVB-ASI to IP User Manual
ASI-IP-GTW User's Manual
Page
3
Important notice:
Network Electronics ASA reserve the right to make corrections,
modifications, enhancements, improvements and other changes to its
products or services at any time and to discontinue any product or
service without notice.
modifications, enhancements, improvements and other changes to its
products or services at any time and to discontinue any product or
service without notice.
About this manual
This manual explains how to operate the ASI-IP-GTW IP to ASI Video
Gateway. It is shown how to install and maintain the unit. In addition,
the functionality of the unit is described in detail.
This manual should be kept in a safe place for reference for the life time
of the equipment. Further copies of this manual can be ordered from
Network. If passing the equipment to a third party, please ensure to
pass all relevant documentation including this manual.
Issues of this manual are listed below:
Gateway. It is shown how to install and maintain the unit. In addition,
the functionality of the unit is described in detail.
This manual should be kept in a safe place for reference for the life time
of the equipment. Further copies of this manual can be ordered from
Network. If passing the equipment to a third party, please ensure to
pass all relevant documentation including this manual.
Issues of this manual are listed below:
How to use this manual
Novice users unfamiliar with the Video Gateways from Network should
read this manual starting with Chapter 1. Users familiar with the
Network Video Gateways and operation of video over IP equipment may
start with Chapter 2. Users which are more interested in the
functionality offered by the ASI-IP-GTW may directly go to Chapter 3.
read this manual starting with Chapter 1. Users familiar with the
Network Video Gateways and operation of video over IP equipment may
start with Chapter 2. Users which are more interested in the
functionality offered by the ASI-IP-GTW may directly go to Chapter 3.
Rev. Date
SW
ver.
Comment
1.1 July
2005
0.11.4 Initial
release
2.0 September
2005
1.1.0 Release
with FEC, VLAN and SFP interface
2.1 November
2005
1.1.5 Intermediate release with implementations on
iterative FEC, more on alarms and other general
improvements.
improvements.
2.2 January
2006 1.2.2 Release
with
SNMP support as optional feature
and support for UDP transmission mode
2.3
April 2006
1.3.x
Release with bi-directional operation, and IGMPv3
support.
support.
2.3b
May 2006
1.3.x
Small patch on description of RTP sequence
errors.
errors.
2.4
July 2006
1.3.11
Ping option (3.5.5), New clock options (3.5.2),
Advanced tab on IPRX (3.7.4),
Speed-/ duplex mode for management port (3.5.1)
2.5 Sept.
2006
1.3.18 Added
support for GPS module.
2.6
Oct. 2006
1.3.22
Added support for User Security and RIPv2.
2.7
March 2007
1.3.33
SNMP tab, Burst/Spread mode, No lock mode,
updated features list.
updated features list.
2.8
April 2007
1.4.0
Dual ASI, Increased FEC matrixes, VBR mode,
new FEC alarm, password resetting.
new FEC alarm, password resetting.
2.9
November 2007
2.20.4
Data channel ping, ASI bitrate limiter, Static MAC
2.10
January 2008
2.22.0
204 byte MPEG-2 transport stream support