Kodak 4F3698 User Manual

6

     

K O D A K   D i s p l a y   M a n a g e r   S y s t e m   V 4 . 0   U s e r ’ s   G u i d e

The following hardware is recommended for use with the Display Manager 
System.

The Display Manager System supports many different monitors but not all 
monitors can be automatically calibrated by the system. Most high-quality 
professional grade monitors can be calibrated.

The first time that you initiate an automatic calibration, you are prompted to 
attach a sensor to the monitor so that the system can assess if the monitor 
can be automatically calibrated.

Before running this evaluation, set your monitor to Expert mode and turn off the 
Super Bright mode if applicable.

You are then notified if the monitor can be automatically calibrated. If it cannot, 
you can manually adjust your monitor using SMPTE standard procedures and 
the supplied colorbars chart. For more information, see 

This evaluation runs whenever you attach a monitor that was not previously 
tested with the system and then initiate automatic calibration.

In addition to displays that can be automatically calibrated, you can use the 
Display Manager System with LCD monitors, HD/SD displays, and digital 
projectors. We recommend cinema grade digital projectors.

An enable cable is required to transfer data from your monitor to your 
computer. This cable can be obtained through Kodak. Contact your service 
representative. See