Kenwood DDX419 Owner's Manual

DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

Setting menu items

• You cannot change <Audio> settings when the unit is in standby.

Menu item

Selectable setting/item

Initial: Underlined

udio

Fader/Balance

Fader : Adjust the front and rear speaker output balance.
♦ F6 to R6; Initial 0
• When using a two-speaker system, set the fader to the

center (0).

Balance : Adjust the left and right speaker output balance.
♦ L6 to R6; Initial 0
Press [

5/∞/2/3 ] or drag [ ] to adjust.

• To clear the adjustment, press [Center].

Equalizer

Change the sound mode or adjust and store the equalization
for each source. (☞ page 41)
♦ Natural/Rock/Pops/Easy/Top40/Jazz/User

Loudness

You can activate/deactivate the loudness function.
♦ OFF
♦ ON

: Cancels.
: Boost low and high frequencies to

produce a well-balanced sound at a low
volume level. The LOUD indicator lights up.

X’over

Adjust the cross over frequency. (☞ page 42)

Volume Offset

Adjust and store the auto-adjustment volume level for each
source. (For discs, the adjustment is stored for each of the
following categories: DVD/DVD-VR, VCD/CD, and DivX/
MPEG1/MPEG2/MP3/WMA/WAV/AAC.) The volume level will
automatically increase or decrease when you change the
source.
♦ –15 to +6; Initial 0

Subwoofer

♦ ON
♦ OFF

: Activates the subwoofer.
: Cancels.

Speaker Select

Select the size of the connected speaker.
♦ Standard/Narrow/Middle/Wide

EN_LVT2268-001A_KR.indb 48

11/11/22 13:49