Kenwood DDX419 Owner's Manual

DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

 Check the installation position of the 

microphone (accessory 9).

 Remove oil and other dirt from the 

installation surface.

 Install the microphone. 

 Wire the microphone cable up to the unit 

with it secured at several positions using 
tape or the like.

⁄

•

  Install the microphone as far as possible from the 

cell-phone.

F

ix a cable with a commercial item of tape.

P

eel the release coated paper of double-face 

adhesive tape to fix on the place shown above.

A

djust the direction of the microphone to the driver.

Accessory 9

 Remove the escutcheon by referring to 

the removal procedure in the section 
<Removing the Escutcheon>.

 Insert the two removal tools 6 deeply into 

the slots on each side, as shown.

A

ccessory 6

 Lower the removal tool toward the bottom, 

and pull out the unit halfway while 
pressing towards the inside.

⁄

•

  Be careful to avoid injury from the catch pins on 

the removal tool.

 Pull the unit all the way out with your 

hands, being careful not to drop it.

EN_LVT2268-001A_KR.indb   82

EN_LVT2268-001A_KR.indb   82

11/11/22   13:50

11/11/22   13:50