jWIN JT-P433 User Manual

www.jWIN.com 

 

L. SET 

DIALING 

MODE 

- 

When the LCD displays “DIAL MODE”, press the SET/BACK button to 
enter. 

- Press 

▲

UP or ▼DOWN to select the desired dialing mode. ‘TONE’ for 

tone dialing and ‘PULSE’ for pulse dialing 

- Press 

the 

SET/BACK button to confirm 

Note: Under the pulse dial state, press the Star button to change to tone dial. 

M.  SET VOICE TARGET NUMBER  

The voice target number is very useful when you are not at home/office to pick 
the call. After setting the voice dialing number, the phone will announce “please 
call XXXXXX (the setting number)” after five (2 ) ringing sounds. 

- 

When the LCD displays “TARGET NUMBER”, just press the desired 
number (at most 16 digits) 

- Press 

the 

SET/BACK button to confirm 

N.  SET VOICE REPORTING ON/OFF 

- 

Under off-hook state, press  the Star button for three (3) seconds to enter 
the setting. 

- 

Press the Star button to choose “VOICE NUMBER/ON” or “VOICE 
NUMBER/OFF” 

- 

If you select “VOICE NUMBER/ON”, the phone will announce the 
incoming number twice. Select “VOICE NUMBER/OFF” to disable the 
function of voice reporting 

O.  SET CALL FORWARD TO VOICE MAIL 

- 

Under off-hook state, press “＃” for three (3) seconds to enter the setting 

- Press 

“＃” to choose “CALL FORWARD/ON” or “CALL FORWARD/OFF”  

- 

If select “CALL FORWARD/ON” and there is any incoming call, the phone 
will announce the voice target number (please refer setting point M) three 
times after 2 ringing sounds.  

P.  SET CALL FORWARD TO EXTENTION LINE 

- 

Under off-hook state, press the SET/BACK button for 3 seconds, the LCD 
will display “OFF” and “- -“  

- Press 

▲

UP or ▼DOWN to select “ON”  

- 

Enter one or two digit(s) from 0-9, Press ▲UP or ▼DOWN to select 
desired number (Press the SET/BACK button to confirm the first digit and 
then set the second digit) 

Note: If you want to set “OFF” from “ON”, under off-hook state, press the 
SET/BACK button for 3 seconds and the LCD will display “ON” and “- -“. Then 
press ▲UP or ▼DOWN to select the “OFF” 

Q.  MUSIC ON HOLD FUNCTION 

- 

Under off hook state (Pick the phone or during speakerphone in use 
status), press [HOLD] to enter music on hold status 

- 

The LCD will display “HOLD” and “-01-” , press ▲UP or ▼DOWN to 
select the music hold melody from 01-04.  

- Press 

HOLD again to recover the conversation 

Note: During the incoming call, if press HOLD once, the ringing sound will be 
turn off immediately. However, it will resume the ringing sound in next 
incoming call.