John Deere 450 User Manual
RTK Base Station Setup
DK01672,000012E -19-21JUL11-1/1
Vehicle Receiver
PC13760
—UN—17MA
Y1
1
RTK Receiver on Top of Cab
PUPC000003
—UN—03DEC09
Wire Bracket on Top of Cab
Position receiver with integrated RTK radio module is
located on top of machine.
located on top of machine.
Position receiver combines the global positioning signals
it receives with the RTK differential correction via the
radio link to provide accurate position information to the
GreenStar™ system.
it receives with the RTK differential correction via the
radio link to provide accurate position information to the
GreenStar™ system.
The receiver has a dedicated operating mode (Vehicle
Mode). Refer to Operating Mode—RTK in Section
StarFire 3000 for setup of the receiver on vehicle.
Mode). Refer to Operating Mode—RTK in Section
StarFire 3000 for setup of the receiver on vehicle.
IMPORTANT: The antenna must be installed before
the radio module is powered ON.
Avoid water intrusion by keeping the antenna
attached whenever possible.
attached whenever possible.
Removing the antenna while powered may
damage the radio module.
damage the radio module.
The RTK Radio 450 system is only compatible with the
deluxe shroud. This may require a conversion bracket
for installation.
deluxe shroud. This may require a conversion bracket
for installation.
PC13782
—UN—19MA
Y1
1
Mannheim Tractor Conversion Bracket
GreenStar is a trademark of Deere & Company
25-2
092711
PN=13