Brother MFC-660MC Owner's Manual
2 - 8
L O C A T I O N A N D C O N N E C T I O N S
Connecting an External Telephone Answering Device
(TAD)
(TAD)
Sequence
You might choose to connect an additional answering system. When you have an
external TAD on the same telephone line as the FAX/MFC, the TAD answers all calls.
The FAX/MFC “listens” for fax calling (CNG) tones. If it hears them, the FAX/MFC
takes over the call and receives the fax. If it doesn’t hear CNG tones, the FAX/MFC
lets the TAD continue playing your outgoing message so your caller can leave you a
voice message.
external TAD on the same telephone line as the FAX/MFC, the TAD answers all calls.
The FAX/MFC “listens” for fax calling (CNG) tones. If it hears them, the FAX/MFC
takes over the call and receives the fax. If it doesn’t hear CNG tones, the FAX/MFC
lets the TAD continue playing your outgoing message so your caller can leave you a
voice message.
The TAD must answer within four rings (the recommended setting is two rings). The
FAX/MFC cannot hear CNG tones until the TAD has answered the call, and with four
rings there are only 8–10 seconds of CNG tones left for the fax “handshake.” Make
sure you carefully follow instructions in this manual for recording your outgoing
message. We do not recommend using the toll saver feature on your external
answering machine if it exceeds 4 rings.
FAX/MFC cannot hear CNG tones until the TAD has answered the call, and with four
rings there are only 8–10 seconds of CNG tones left for the fax “handshake.” Make
sure you carefully follow instructions in this manual for recording your outgoing
message. We do not recommend using the toll saver feature on your external
answering machine if it exceeds 4 rings.
Do not connect a TAD elsewhere on the same phone line—your FAX/MFC and TAD
will both try to control the line.
will both try to control the line.