Brother MFC-660MC Owner's Manual

      M E S S A G E   C E N T E R

Dial your fax number.

When you hear the beep, immediately enter your Remote Retrieval Access Code 
(

).

As soon as you hear two short beeps, use the dial pad to press 

.

Using the dial pad, enter the number of the remote fax machine (up to 20 digits) where 
you want your fax messages forwarded, and then press # #.

After you hear your FAX/MFC beep, hang up and wait.

Your FAX/MFC calls the remote fax machine.  The remote fax machine prints your 
fax messages.

You can change the default setting of your fax forwarding number from a remote fax 
machine.

Dial your fax number.

When you hear the beep, immediately enter your Remote Retrieval Access Code 
(

 ).

When you hear two short beeps, use the dial pad to press 

.

Enter the new number of the remote fax machine where you want your fax messages 
forwarded, then press # #.

To retrieve the Memory Status List, when you hear two short beeps, use the dial pad 
to press 

.

Use the dial pad to enter the number of the remote fax machine (up to 20 digits), then 
press # #.

After you hear your FAX/MFC beep, hang up and wait.

Your FAX/MFC calls the remote fax machine. The remote fax machine prints the 
Memory Status List showing the new forwarding number.

Check the forwarding number.

If the forwarding number is not correct, return to Step 1 to reset it.

You can not use 

or  

 as dial numbers. However, if you want to store a pause, 

press #.

You can not use 

 or  

 as dial numbers.  However, if you want to store a pause, 

press #.