MiTAC mitac 8355 User Manual
8355 N/B MAINTENANCE
8355 N/B MAINTENANCE
105
5.2 K8T800M(VT8385) North Bridge-4
Clock, Reset, Power Control and Test
Signal
Name Type I/O
Description
GCLK
A11 I
AGP Clock. 66 MHz clock for AGP logic.
RESET#
AD25 I
Reset. Input from the south Bridge chip. 3.3V tolerant input.
When asserted, this signal resets the chip and sets all register
bits to the default value. The rising edge of this signal is used to
sample all power-up strap options. In addition, HTRST# is
driven active to reset the K8 CPU.
When asserted, this signal resets the chip and sets all register
bits to the default value. The rising edge of this signal is used to
sample all power-up strap options. In addition, HTRST# is
driven active to reset the K8 CPU.
PWROK
AE26 I
Power Ok. Driven by South Bridge PWROK output from the
power supply PWRGOOD input to PULL-up to disable.
power supply PWRGOOD input to PULL-up to disable.
SUSST
AD26 I
Suspend Status. For implementation of the Suspend-to-DRAM
feature. Connect to an external pull-up to disable.
feature. Connect to an external pull-up to disable.
TESTIN
AC26 I
Test In. This pin is used for terssting and must be left
unconnected or tied high (4.7KΩ to 2.5V) on all board designs.
unconnected or tied high (4.7KΩ to 2.5V) on all board designs.
DEBUG AC17
Debug.
NC (see
pin
list)
No Connect. Reserved for graphics functions in pin-compatible
“K8M800” chipset north bridge.
“K8M800” chipset north bridge.