LevelOne Network Hardware 11g PoE Wireless Access Point User Manual
9
Chapter 3
Access Point Setup
This Chapter provides details of the Setup process for Basic Operation of
your WAP-0005, PoE Wireless Access Point.
your WAP-0005, PoE Wireless Access Point.
Overview
This chapter describes the setup procedure to make WAP-0005 a valid device on your LAN,
and to function as an Access Point for your Wireless Stations.
and to function as an Access Point for your Wireless Stations.
Wireless Stations may also require configuration. For details, see Chapter 4 - Wireless Station
Configuration.
Configuration.
WAP-0005 can be configured using either the supplied Windows utility or your Web Browser
Setup using the Windows Utility
A simple Windows setup utility is supplied on the CD-ROM. This utility can be used to assign
a suitable IP address to WAP-0005. Using this utility is recommended, because it can locate
the Wireless Access Point even if it has an invalid IP address.
a suitable IP address to WAP-0005. Using this utility is recommended, because it can locate
the Wireless Access Point even if it has an invalid IP address.
Installation
1. Insert the supplied CD-ROM in your drive.
2. If the utility does not start automatically, run the SETUP program in the root folder.
3. Follow the prompts to complete the installation.
2. If the utility does not start automatically, run the SETUP program in the root folder.
3. Follow the prompts to complete the installation.
Main Screen
• Start the program by using the icon created by the setup program.
• When run, the program searches the network for all active Wireless Access Points, and
• When run, the program searches the network for all active Wireless Access Points, and
then lists them on screen, as shown by the example below.
Figure 6: Management utility Screen
3