LevelOne Network Hardware 11g PoE Wireless Access Point User Manual

Setup 

33 

Enter the name or IP address of the Radius Server on your 
network. 

Enter the port number used for connections to the Radius 
Server. 

This read-only field displays the current login name, which is 
the same as the name of the Access Point. The Radius Server 
must be configured to accept this login. 

This is used for the Client Login on the Radius Server. Enter the 
key value to match the Radius Server. 

Select the desired option:  
•  64 Bit  - Keys are 10 Hex (5 ASCII) characters. 
•  128 Bit - Keys are 26 Hex (13 ASCII) characters. 
•  156 Bit - Keys are 32 Hex (16 ASCII) characters. 

Click this if you want the WEP keys to be automatically 
generated. 
•  The key exchange will be negotiated. The most widely 

supported protocol is EAP-TLS.  

•  The following Key Exchange setting determines how often 

the keys are changed. 

•  Both Dynamic and Static keys can be used simultaneously, 

allowing clients using either method to use the Access 
Point. 

This setting if only available if using Dynamic WEP Keys. If 
you want the Dynamic WEP keys to be updated regularly, 
enable this and enter the desired lifetime (in minutes). 

Enable this if some wireless clients use a fixed (static) WEP 
key, using EAP-MD5. 
Note that both Dynamic and Static keys can be used 
simultaneously, allowing clients using either method to use the 
Access Point. 

Enter the WEP key according to the WEP Key Size setting 
above. Wireless stations must use the same key. 

Select the desired index value. Wireless stations must use the 
same key index. 

Enable this if you want this Access Point to send accounting 
data to the Radius Server.  

If enabled, the port used by your Radius Server must be entered 
in the Radius Accounting Port field. 

Update Report every ...  If Radius accounting is enabled, you can enable this and enter 

the desired update interval. This Access Point will then send 
updates according to the specified time period.