Hughes AN6-098P User Manual

 

Figure 26 shows how the TRIA is positioned for horizontal 
transmit polarization compared to how it is positioned for 
vertical transmit polarization. 

6. Make sure the O-ring shown in Figure 25 on page 34 is in 

place in the shim.

7. With the TRIA correctly positioned (rotated), place the 

waveguide end plate against the shim.

8. Insert and tighten the four Allen screws.

At this point the radio assembly is ready to be installed.

Figure 26:  TRIA position for horizontal and vertical transmit 

polarization

Horizontal polarization

TRIA rotated for vertical polarization

TRIA

TRIA