High End Systems Technobeam User Manual

Technobeam

®

 User Manual

3-3

A complete menu map and explanations of the Technobeam menu 
options are listed in this section.  See individual subsections in this 
addendum for descriptions of each menu item.

Chapter 4 has more information about using the menus to program the 
fixture’s sixteen onboard scenes (presets).

If your Technobeam-i does not have an iris and/or Laser 
Aiming Device™ (LAD®), the iris and LAD-related menu 
items listed below will have no functionality.

Although Technopro and Technoray fixtures have been 
discontinued, their menu options still exist in the 
protocol, and are listed below.

ADDR

Fxx/Cxxx

change the existing fixture number/DMX start 
channel

SET

FACT

ON

set factory defaults on

OFF

set factory defaults off 
Note: Selecting this option has no affect on 
individual preset values.

SWAP

ON

set pan/tilt swap on

OFF

set pan/tilt swap off

T/IN

ON

set tilt invert on

OFF 

set tilt invert off

P/IN

ON

set pan invert on

OFF

set pan invert off

DSPL

ON

set LED display on

OFF

set LED display off

DIM

dim LED display

D/IN

ON

invert LED display orientation

OFF

set normal LED display orientation

CHNL

DMX

set control method to DMX start channel

ADDR

set control method to fixture number

LMPL

ON

enable lamp hour warning message

OFF

disable lamp hour warning message

LENS

NORM

factory lens or narrow angle lens setting

WIDE

wide angle lens setting

NARW

standard or narrow angle lens setting that 
increases the distance the lens tube can move 
to allow for a greater throw distance
Note:  This option is not for use with wide angle 
lenses.