Hobart MG1532 User Manual
– 6 –
CONTROL BOX HEATERS
The Mixer-Grinder has a heater in the control box and another heater in the front control panel to keep
the controls dry. They are automatically ON when the machine is electrically connected. The Mixer-
Grinder should always be connected EXCEPT when performing assembly, disassembly, cleaning, or
maintenance of the machine. After cleaning, reconnect the electrical power supply.
the controls dry. They are automatically ON when the machine is electrically connected. The Mixer-
Grinder should always be connected EXCEPT when performing assembly, disassembly, cleaning, or
maintenance of the machine. After cleaning, reconnect the electrical power supply.
OPERATION
CONTROLS (Fig. 4)
Fig. 4
MIX START Button— Starts rotating the mix arm. Use the Stop Button to stop mixing.
STOP Button — Turns the mixer-grinder off. Turns the Foot Switch off if it was on.
MIX/GRIND START Button — Starts rotating both mix arm and worm. Use the Stop Button to stop
mixing and grinding.
mixing and grinding.
FOOT SWITCH — When On, the Mix Start and Mix/Grind Start Buttons are inoperable and the
accessory Foot Switch can be used to Mix/Grind ONLY. The indicator light shows when the Foot Switch
is On. Push the STOP Button to turn the Foot Switch Off.
accessory Foot Switch can be used to Mix/Grind ONLY. The indicator light shows when the Foot Switch
is On. Push the STOP Button to turn the Foot Switch Off.
HOPPER LID INTERLOCK — An interlock switch requires the hopper lid to be closed before the
machine can operate. Raising the hopper lid opens the electrical circuit and makes the machine
inoperative.
machine can operate. Raising the hopper lid opens the electrical circuit and makes the machine
inoperative.
Fig. 5
PL-41181-1
HOPPER LID
LATCH
GRINDER CYLINDER
ADJUSTING RING
MACHINE DATA PLATE
BUSHING RETAINER
FLANGE NUT
FOOT
SWITCH
MIX
START
STOP
FOOT SWITCH OFF
ON
MIX/GRIND
START