Hitachi HCX5000I User Manual
E
XTENDING
AN
I
NCOMING
D
ATA
C
ALL
TO
A
S
TATION S
ELEC
S
ET
500A U
SER
G
UIDE
2-76
HCXTD840, Issue 1, July 2001
Extending an Incoming Data Call to a Station
Using the
<CONV> key
<CONV> key
You can extend a data call to a station by using the
<CONV> (convert) key.
<CONV> (convert) key.
Procedure
To extend a data call to a station (only older SelecSets
support data calling):
support data calling):
1
While talking on a voice call, press the <CONV> key.
The call is placed in consultation hold. (Consultation
hold temporarily removes the party from the
connection so transfer or conference operations can
be performed.)
The call is placed in consultation hold. (Consultation
hold temporarily removes the party from the
connection so transfer or conference operations can
be performed.)
2
The CAP representing the held call winks slowly.
3
The <CONV> and <JOIN> keys are steadily lit.
4
Dial the desired station number (you can dial your
own station number to extend a data call to yourself).
own station number to extend a data call to yourself).
5
Press <JOIN>. The <JOIN> and <CONV> keys go
dark. (If you are converting/transferring a data call to
yourself, the data lamp should be flashing. Press
<DATA> to answer the call).
dark. (If you are converting/transferring a data call to
yourself, the data lamp should be flashing. Press
<DATA> to answer the call).
6
Press <START> to disconnect.
7
To cancel a voice to data call conversion, press the
winking CAP before pressing <JOIN>.
winking CAP before pressing <JOIN>.