Hitachi HCX5000I User Manual
D
ETERMINING
IF
A
D
ATA
A
DAPTER
IS
A
SSIGNED
HCXTD840, Issue 1, July 2001
A-11
Determining if a Data Adapter is Assigned
Procedure
To determine if a data adapter is assigned:
1
Press and hold the <DA> key to display a new line
above the key labels. This display tells you if a data
adapter is assigned to the console.
above the key labels. This display tells you if a data
adapter is assigned to the console.
2
Lift your console to see if a wedge-shaped device
(data adapter) is attached underneath and the console
has short legs attached to it. When you first assign a
data adapter, use this test procedure to confirm that
your data adapter is assigned properly. See
(data adapter) is attached underneath and the console
has short legs attached to it. When you first assign a
data adapter, use this test procedure to confirm that
your data adapter is assigned properly. See
for an example of a display showing data adapter
assignment.
assignment.
Figure A-8: Displaying data adapter assignment
If a data adapter is assigned to your console, the display
reads DATA ADAPTER = YES.
reads DATA ADAPTER = YES.
*** DATT TEST ***
KEY NO. =
RINGING FREQUENCY =
RINGING LEVEL =
RINGING PATTERN =
DATA ADAPTER =
OFF
NORMAL
LINE-LINE (USA)
NO
NORMAL
LINE-LINE (USA)
NO
R-FRQ
R-LEV R-PTN
DA
ROM
LCD