Gossen SI 232-II User Manual
10
GOSSEN METRAWATT GMBH
5.2
Display
Figure 4.3
Memory Adapter LCD
1
Digital Display
The current menu item appears at the 7 segment liquid crystal display during manual
operation of the memory adapter.
When stored data are viewed, measurement values appear at the display in digital format
(menu item “reCAll”, chapter •, page 21).
The current menu item appears at the 7 segment liquid crystal display during manual
operation of the memory adapter.
When stored data are viewed, measurement values appear at the display in digital format
(menu item “reCAll”, chapter •, page 21).
2
Analog Display
Available memory space can be estimated with the help of the analog display.
For example, the diagram in chapter 5.3, page 11, indicates that the memory is approxi-
mately 13/30 full.
When stored data are viewed, measurement values appear at the display in digital format
(menu item “reCAll”, chapter •, page 21).
Available memory space can be estimated with the help of the analog display.
For example, the diagram in chapter 5.3, page 11, indicates that the memory is approxi-
mately 13/30 full.
When stored data are viewed, measurement values appear at the display in digital format
(menu item “reCAll”, chapter •, page 21).
3
Special Characters
The special characters which appear at the display have the following meanings:
The special characters which appear at the display have the following meanings:
• DATA blinks when data are being received from the multimeter.
• REM blinks when data are being received from the PC.
• The ON triangle (upper left) appears when data are being transferred from the multime-
ter to the memory adapter (with adapter in STORE mode).
• ON (top center) appears when the trigger condition has been fulfilled in the STORE
mode. If no trigger threshold has been selected, ON appears as soon as data record-
ing starts.
ing starts.
• The left-hand overflow arrow next to the analog display always blinks when data are
being saved in the STORE mode.
• The t symbol appears when a time trigger is active in the STORE mode.
• The battery symbol appears when battery capacity has been approximately
2
/
3
depleted. Remaining battery capacity (for alkaline batteries) is sufficient to continue
storing measurement data for at least 96 hours, depending upon the selected sam-
pling rate.
storing measurement data for at least 96 hours, depending upon the selected sam-
pling rate.
3
1
2