Epson CPD-26557 Leaflet

1. If you’re connecting to a network, use the 

Ethernet cable that came with your product.

:

Connect the cable for wireless or wired 
networks. For a wireless connection, you’ll 
remove the cable later.

2. Set up your product using the Start Here sheet. 

DO NOT follow the software installation steps 
under “USB connection.”

3. Install your software using the Network 

Installation Guide.

For a variety of network setup information, go to: 
www.epson.com/support/wireless

1. If you are NOT installing your product on a 

network, connect it using a USB cable (not 
included). 

You can purchase a USB cable at most 
electronics stores.

2. Set up your product and install your software as 

described on the Start Here sheet.

CPD-26557

Printed in/Pays d’impression : Indonesia

Ethernet network 
cable (included)

USB cable 
(not included)