Emerson EM529S Leaflet

Model: EM529S

WIRELESS HEADSET

NOTE: To enter Pairing Mode at any time, you must press and 

HOLD the [Call] button for approximately 10 seconds.

5. Set your mobile phone to search for Bluetooth devices.

Continue here from “Easy Pairing”

Searching for devices

Paired Devices:

1 f

ound

Stop

 *Empty *

Bluetooth: Enabled

Select “Pair” to complete the pairing process.

“EM529” would like to pair

with your phone. Would you

like to allow it to pair?

Paired Devices:

Cancel

Pair

EM529

Bluetooth: Enabled

8. Your mobile phone will confirm that the pairing process was 

completed and prompt you to accept the connection. 
Please select “YES” to connect the headset to your mobile 
phone. If the pairing was successful, the headset’s blue 
indicator light turns to standby mode and flashes once 
every three seconds.

NOTE: The screenshots above are typical of many Bluetooth 

enabled phones in the market today, and are used to 
assist in the explanation of the pairing process. Your 
mobile phone’s or Bluetooth enabled device’s interface 
and interaction with the headset may be slightly 
different from the illustrations shown.

9. When attempting to reconnect the headset to your mobile 

phone, you may see the message below and your mobile 
phone will prompt you to accept the connection request to 
the EM529 headset, and an option not to ask this again. 
Please accept the connection, and if you select “Don’t ask this 
again”, your phone will automatically accept future connection 
requests from the headset.

Confirm connection to

EM529?

Paired Devices:

YES

NO

EM529

Bluetooth: Enabled

/

Accept connection request

from EM529?

Paired Devices:

YES

NO

EM529

Bluetooth: Enabled

/

Don’t ask this again

CAUTION: Although this device enables drivers to 
conduct handsfree conversations, it is still safer to pull
over before using a mobile phone.
Always keep your full attention on your driving.

Driving while talking on your mobile phone is dangerous, and 
illegal in many states.

Check local laws regarding the use of a mobile handset and wireless
headset while driving. If you use the Bluetooth Headset while 
driving, ensure your attention and focus remains on your driving.
 

NOTE: Charge the headset for at least 8 hours before using it
for the first time, even if the RED LED indicator shuts off.

1. Connect the small end of the USB cable to the charging 
    socket of the headset.
2. Connect the other end of the USB cable to either the:
 

3. The RED LED indicator light turns on while the headset is 

charging.

4. The RED LED indicator light shuts off when the headset is 

fully charged (approximately 2-3 hours).

NOTE: When the battery is running low, the RED LED indicator 
               light starts to flash along with a warning beep.

Owner’s

Manual

USB charging

cable

AC charger

Silicone cushions

S M L

Car Charger

Earhook

Bluetooth

Headset

Stereo earphone

1. Make sure the Bluetooth Headset is within 3 feet of your 

mobile phone or Bluetooth enabled device.

2. Set the [Power] switch to the ON position. 

3. Press and HOLD the [Call] button until the indicator light 

flashes RED and BLUE alternately.

4. The headset is now in Pairing Mode and is ready to connect 

to your mobile phone or Bluetooth enabled device.

within 3 feet

Red and Blue flashing

Power ON/OFF

(Green = ON, Red = OFF)

This Bluetooth headset has an “Easy Pairing” feature which sets 

the headset to Pairing Mode the first time the power switch 

is turned on.

1. Make sure the Bluetooth Headset is within 3 feet of our 

mobile phone or Bluetooth enabled device.

2. Set the [Power] switch to the ON position. The indicator 

light should be flashing RED and BLUE alternately, indicating 

the headset is in Pairing Mode and ready to connect to your 

Bluetooth enabled device. 

3. Continue to “Manual Pairing” step 5 shown in the next column.

NOTE: Manual Pairing 

If the first time pairing was unsuccessful or for future pairing, 

you will need to manually pair the headset to your Bluetooth 

enabled device (see “Manual Pairing” step 1 in the next column ).

Power ON/OFF

(Green = ON, Red = OFF)

within 3 feet

Power ON/OFF

(Green = ON, Red = OFF)

Answer/end a call

Car Charger

PC

AC Charger

Model: EM529S

WIRELESS HEADSET

OR depending on which model mobile phone you are trying 
to connect the headset to, it may not be necessary to enter a 
passcode and the following message (or similar) may appear on 
your phone’s display.

Enter numeric passkey

for EM529:

Paired Devices:

0000

OK

EM529

Bluetooth: Enabled

6. When the phone finds the headset, confirm by selecting 

EM529 from the list.

Select Device:

Paired Devices:

EM529

Cancel

EM529

Bluetooth: Enabled

7. Enter the passcode “0000” when prompted by the phone. 

This headset uses a dual microphone design to filter out wind 
and unwanted external noise.

Using Noise Cancellation Technology, the headset compares the 
sound from the twin, built-in microphones, and is able to recognize 
the difference between voice and unwanted background noise.

Enables the other end of your 

conversation to hear you clearly!

Red and Blue flashing