Furuno FELCOM 16 User Manual

 

This chapter provides the information necessary for the maintenance and 
checking of the FELCOM 16. Please read the safety information at the beginning 
of this manual before attempting any maintenance procedure. 
 
 

Turn off the power before conducting any maintenance procedures other than 
the cleaning of the communication unit. 

Those items contain organic solvents that 
can damage coating and plastic parts, 
especially plastic connectors.

 
Cleaning the communication unit 

Dust and dirt can be removed from the communication unit with a soft, dry cloth. 
DO NOT use chemical cleaners. They may remove paint and markings or 
deform the equipment. 
 
Checking connectors and earth terminal on the communication unit 

Check that the connectors and earth terminal on the communication unit are 
tightly fastened. If the copper strap (earth material) has rusted, clean it. 
 
When the power can’t be turned on 

When the communication unit cannot be turned on do the following: 

•  Check that the power cable connector on the rear panel of the 

communication unit for tightness.   

•  Check if the ship’s mains switchboard is turned on. 
•  Have a qualified technician check the power voltage at the power connector 

on the rear of the communication unit.