Fujitronic Programmable Operation Display UG520H-x User Manual
2 - 99
SIEMENS PLC • 5
(TI545, 555)
36
19200bps
Baud Rate
Parity
Transmission
Code
Data Length
Stop Bit
Item
Setting of PLC
19200bps
None (fixed)
8 (fixed)
1 (fixed)
Comm. Parameter of POD
PLC
Wiring Diagram
TI545/555 CPU port
(built-in)
RS-232C [Wiring Diagram 1]
RS-422
[Wiring Diagram 2]
Select PLC Type
TI500/505
(TI500/505 UG400)
Available PLC
Communication Setting
Connect the cable to the CPU port (RS-232C built-in port) for TI545/555.
The recommended communication parameter setting of both PLC and POD is as follows:
Available Memory
*
1
In case of using DCP (drum count/set value), set the
drum step No.1 to 16.
The assigned memory is indicated while editing the
screen as illustrated:
Set the memory to the extent of the memory range of each PLC model.
Use TYPE number to assign indirect memory for macro programs.
Use TYPE number to assign indirect memory for macro programs.
36 SIEMENS PLC
•
5
<E.g.> DCP30000 : 1
Drum step No.
Address No.
Colon
Memory
TYPE
Remarks
V
(variable memory)
0
WX (word input)
1
WY (word output)
2
X
(discrete input)
3
Y
(discrete output)
4
CR
(control relay)
5
TCP (timer counter/set value)
6
TCC (timer counter/current value)
7
DCP (drum count/set value)
8
*
1
DCC (drum count/current value)
9
Read only
DSP (drum step/set value)
10
DSC (drum step/current value)
11
K
(fixed memory)
12
STW (system state)
13