Clearsounds CS-CLA7BT User Manual

6 – ENGLISH

7 – ENGLISH

Before using your CLA7BT for the first time, you

need to charge its self-contained LI-Ion battery

for 24 hours.

When  you  hear  5  rapid  beeps  through  your

hearing aid or repeated at 20 second intervals

and the LED indicator turns red you will need to

recharge the battery.
After  the  battery  is  fully  charged,  the  LED

indicator will turn off. It takes approximately 1

to 1.5 hours to fully charge the battery. Do not

charge for more than 24 hours.
Over  extended  periods  of  time,  the  battery

will  gradually  wear  down  and  require  longer

charging  times.  This  is  normal.  The  more  you

talk on the phone using your CLA7BT the less

standby time your battery has.

1  Using AC Power Supply - Connect the

3.5mm end of the USB cable into the

charging port of the CLA7BT, and then

connect the other end into the USB jack

of the base charger. Plug the base charger

CLA7BT-EN,SP,FR.indd   6

9/9/08   10:45:01 AM