Chauvet Wheelchair GVC User Manual
Scorpion™ RVM/RGY/GVC User Manual (Rev. 01e)
Page 11 of 24
3.
S
ETUP
AC Power
This product has an auto-ranging power supply and it can work with an input voltage range of
100~240 VAC, 50/60 Hz.
100~240 VAC, 50/60 Hz.
To determine the power requirements for a particular fixture, see the label affixed to the back
plate of the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating
indicates its average current draw under normal conditions.
plate of the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating
indicates its average current draw under normal conditions.
Always connect this product to a protected circuit (circuit breaker or fuse), making sure
that it has an appropriate electrical ground to avoid the risk of electrocution or fire.
that it has an appropriate electrical ground to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
rheostat or dimmer channel serves only as a 0 to 100% switch.
Power Linking
This fixture provides power linking via the Edison outlet located in the back of the unit. Please
see the diagram below for further explanation.
see the diagram below for further explanation.
Power Linking
Diagram
You can power link up to 37 Scorpion
™ RVM/RGY/GVC fixtures on 120 VAC or up to 74
Scorpion RVM/RGY/GVC fixtures on 230 VAC.
The power linking diagram shown above corresponds to the North American version of
this product ONLY! If using this product in other markets, you must consult with the
local CHAUVET® distributor as power linking connectors and requirements may differ in
your country or region.
this product ONLY! If using this product in other markets, you must consult with the
local CHAUVET® distributor as power linking connectors and requirements may differ in
your country or region.
1
st
Fixture
2
nd
Fixture
3
rd
Fixture
To other
fixtures