Falcon B-300 User Manual

❏ Make sure your paper is dry and the printable side is facing up in the rear sheet feeder 

and facing down in the front paper cassette.

❏ If the paper is curled toward the printable side, flatten it or curl it slightly in the opposite 

direction.

❏ Make sure the paper type selected in the printer driver is appropriate for the type of 

paper loaded in the printer.
&

❏ Remove each sheet from the output tray as it is printed.

❏ If you are printing on glossy media, place a support sheet (or a sheet of plain paper) 

beneath the stack, or load only one sheet at a time.

❏ Do not touch or allow anything to come into contact with the printed side of paper with 

a shiny finish. To dry your printouts, follow the instructions on the sheet packed with the 
paper.

❏ Run the Head Cleaning utility.

&

❏ Use the Print Saturation Adjustment feature to reduce the amount of ink on the page 

and increase the drying time if necessary.
&

❏ Adjust the ink levels in the photo image.

❏ Turn off the printer and computer. Make sure the printer’s interface cable is securely 

plugged in.

❏ Clear the print job from the print queue.

❏ Uninstall the printer driver, then reinstall it.

&