Manualsbrain.com
  1. Manuals
  2. Brands
  3. Audiovox
  4. Video DTT7810FM
  5. User Manual

Audiovox Video DTT7810FM User Manual

Download
Page of 18
System Panel Controls
DTT7810 Operation
11
SETTING THE CLOCK:
NOTE: All settings are preformed in standby mode.
1. Selecting 12 or 24 hour display mode:
a.) Press the “clock mode” button once. The 12H/24H and AM/PM indicator will flash.
b.) Press the “radio tune/clock set” (
-
) or (+) button to toggle between 12 or 24 hour modes.
2. Setting the  time:
a.) Press the “clock mode” button twice. The hours and minutes will flash.
b.) Press the “radio tune/clock set”(
-
)
 
button to set the hour
. 
This will also set AM/PM.
c.) Press the “radio tune/clock set”(+)
 
button to set the minutes.
3. Selecting the alarm type:
a.) Press the “clock mode” button three times. The alarm indicator will flash.
b.) Press the “radio tune/clock set” (
-
) or (+) button to toggle between the three alarm options
     (Alarm/Radio and OFF).  A musical note will appear to indicate the radio has been selected.
     A bell will appear to indicate the alarm tone has been selected.  If the alarm OFF mode is
     selected there will be no indicator displayed
4. Setting the alarm time:
a.)  Press the “clock mode” button four times. The alarm indicator will be displayed and the hours
       and minutes will flash.
b.)  Press the “radio tune/clock set” (
-
)
 
button to set the hour
. 
This will also set AM/PM.
c.)  Press the “radio tune/clock set”
 
(+)
 
button to set the minutes.
Note: During any of the setting procedures if no buttons are pressed for four (4) seconds the 
DTT7810FM will go back to standby mode.
OPERATION SELECTION:
Note: The DTT7810 default source is the DVD shuttle. When power is turned OFF the 
DTT7810FM will default to the DVD shuttle.
SOURCE SELECTION:
1. DVD mode – When power is turned ON the DTT7810FM will be in DVD mode. When one of the 
                      DVD shuttles is installed it will power ON a moment after the DTT7810FM is turned
                      ON.
2. TV mode – Press the “Source” button once.
          
 
     
 
– The DTT7810FM will be in TV tuner mode.
3. AV mode – Press the “Source” button twice.
          
 
    
 
 – The DTT7810FM will be in AV mode. Any A/V source connected to the AV inputs on
                    the rear of the unit will be displayed.
4. Radio mode – Press the “Source” button three times.
               – The DTT7810FM will be in Radio mode. The unit will be in the last band that was
                         selected (FM1, FM2, or AM)