GE DV-354 User Manual

The

Settings Menu

Using the Initial Settings
menu

The Initial Settings menu gives you complete

control in setting up your DVD player,

including audio, and video output settings,

audience limitation settings, among others.

If an option is grayed out it means that it

cannot be changed at the current time. This

is usually because a disc is playing. Stop the
disc, then change the setting.

Press SETUP and select ‘Initial Set-

tings’ from the on-screen display.

Select the setup category from the list

on the left, then select an item from the

menu list to the right.

Make the setting you want.

Note

The language options shown in the

screen display illustrations on the

following pages may not correspond to
those available in your country or

region.

Digital Audio Out settings

Digital Out

Default setting: On

You only need to make this setting

connected this system to an AV receiver (or
other component) using one of the digital

Dolby

DTS Out

. . . . . .

Options

MPEG Out

. .

If at any time you need to switch off the
digital audio output, set this to Off, other-

wise leave it On.

Note that you can’t switch on/off the optical

and coaxial outputs individually.

Dolby Digital Out

Default setting: Dolby Digital

You only need to make this setting if you

connected this system to an AV receiver (or
other component) using one of the digital
outputs.

Settings

If your AV receiver (or other connected

component) is Dolby Digital compatible, set

to Dolby Digital, otherwise set to Dolby

Digital PCM.