Bosch Appliances Home Security System DVA-16K User Manual

en | Subsystem Maintenance

RAID Subsystem DVA-16K | Installation Manual

F.01U.027.799 | V2 | 2008.08

Bosch Security System

Fig. 6.2

Removing the Controller Module

6.2.3

Replacing the Controller Module

If the controller module itself has failed, it must be replaced. To replace a failed controller

module:

Remove the controller module from the subsystem (see Section 6.2.2 Removing the Con-

troller Module.) If the DIMM module is undamaged it can be removed and reinstalled on

the new controller module. For instructions on removing and installing a DIMM module,

Install the DIMM module onto the new controller module, making sure that the memory

Install the controller module. Make sure the levers at the back of the controller module

are down. Align the controller module with the controller module bay at the rear of the

subsystem. Gently slide the controller module in. (See Section 6.3 Installing the Controller

Fig. 6.3

Installing the Controller Module

Reposition the controller module. Once fully inserted, lift up the levers at the back of the

controller module. This will set the controller module in the correct position. (See

Fig. 6.4

Lifting the Controller Module Latches Upward

Secure the controller module to the subsystem. Install the two (2) screws on the levers

to secure the controller module in place. (See Figure 6.5)

Levers