Wacom Graphire User Manual

     Page  88

If the Wacom Tablet driver failed to load properly, first perform the recommended action in the error 
message on your screen.  If that does not solve the problem, perform the troubleshooting tests for your 
tablet or tool(s).

Make sure your computer is turned on, the operating system has finished loading, and Graphire is 
properly connected to an active USB port.  Then try the following tests:

1.

  The tablet’s orange status LED will light whenever Graphire is properly 

connected and your computer has registered it as a USB device.  If the LED is on, continue with step 2.
If the LED is off:
•

Make sure all USB cables are securely connected to an active USB port.

•

If you are connecting the tablet to a USB hub (or hub device such as a keyboard with USB ports), 
be sure the USB hub is properly connected to your computer and is active.

•

Connect Graphire into a different USB port or try connecting to the USB port on another computer.

•

If the tablet’s status LED does not illuminate after your computer is on and has finished booting up, 
your USB port may be inactive.  See 

.