WatchGuard Technologies FireboxTM System 4.6 User Manual

Page of 170
User Guide
141
CHAPTER 19
Preparing a Host for Remote 
User VPN
Remote user virtual private networking (RUVPN) establishes a secure connection 
between an unsecured remote host and a protected network over an unsecured 
network. RUVPN connects an employee on the road or working from home to trusted 
and optional networks behind a Firebox using a standard Internet dial-up connection 
without compromising security. 
The WatchGuard Firebox System offers two types of RUVPN:
• Remote User PPTP – Uses the Point-to-Point Tunneling Protocol. This type of 
RUVPN is included with the basic WatchGuard package and supports up to 50 
concurrent sessions per Firebox. It works with any Firebox encryption level.
• Mobile User VPN – Uses Internet Protocol Security (IPSec). This type of 
RUVPN is an optional feature of the WatchGuard package. It also requires that 
the Firebox be approved and upgraded to strong or medium encryption level.
RUVPN requires configuration of both the Firebox and the end-user remote host 
computers. This section describes how to configure a remote host for Remote User 
VPN with PPTP. For information on configuring the Firebox, see “Configuring the 
Firebox for Remote User VPN” on page 133. 
For information on configuring a remote host for Mobile User VPN, see the Mobile 
User VPN brochure provided with Mobile User VPN licenses. You can download a 
copy from the LiveSecurity Service Web site.
Preparing the client computers
Every computer used as a Remote User VPN with PPTP remote host must first be 
prepared with the following:
• Operating system software
• Device drivers
• Internet service provider account