Sony RM-VLZ620 Operating Guide

RM-VLZ620_U (US) 4-170-639-12(1)

Press POWER in Step 3 above.

The Device Select buttons set for 

Sony devices will flash in sequence.
Device Select buttons set for non-

Sony devices will not flash.

Perform the same procedure as 

when you clear the automatic 

power-on control.
Notes 

 If you set the manufacturer’s code of a 

non-Sony device on a Device Select 

button, you cannot set the automatic 

power-on control on the button. 

If you change to the code of a non-Sony 

device after setting automatic power-on 

control, the control will be cleared.

 If you attempt automatic power-on control 

for a non-Sony device, the SET indicator 

will flash once and turn off (to indicate 

that you cannot set this control).

 If you teach a signal or program a 

consecutive procedure to a Device Select 

button to which the automatic power-on 

control is set, the control will not work. To 

activate the control, clear the learned 

signal or programmed consecutive 

procedure from the Device Select button.

You can use the RM-VLZ620 for major 

brand A/V devices. To use with non-

Sony A/V devices, or Sony devices that 

are not preset at the factory (see table 

below for factory setting), you need to 

set the manufacturer’s code for each 

device to any of the eight Device Select 

buttons.

TV

Sony TV

02473

CBL (SAT)

Cable set top box 

(non-Sony)

51376

DVR (PVR)

Sony digital video 

recorder

22676

DVD

Sony DVD player 11033

BD

Sony Blu-ray Disc 

player

11516

VCR

Sony VCR

60032

CD

Sony CD player

70000

AMP

Sony receiver

82586

*

  The five-digit code is the preset 

manufacturer’s code.

 Only a TV or projector can be assigned to 

the TV Device Select button. You can 

assign any device to the other Device 

Select buttons. For button functions for 

each device, see “Table of Preset Functions” 

(page 36).

 If no operations are performed for 10 

seconds while setting, the setting will be 

canceled, and must be restarted.

 Some devices that do not support infrared 

signals will not work with the 
RM-VLZ620.