Soundolier CP700 Leaflet
Specifications subject to change without notice
381
NINE
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
AtlasSound.com
HIGH PERFORMANCE DUAL CHANNEL
COMMERCIAL AUDIO AMPLIFIER
CP700
Amplifier
© 2005 Atlas Sound LP
Printed in U.S.A.
001205 ATS002228 RevA 12/05
SL9-2076
CP700 (Front View)
CP700 (Rear View)
CP700 (Inside View)
FEATURES
• Two channel with 25/70.7/100V and 8/4/2 Ohm output
capability
• Short circuit, temperature and DC offset protection
• Rear mounted stepped attenuators
• Stereo/Parallel and Bridge Mono Operating Modes
• Balanced Inputs on Barrier Strip and XLR Connectors
• Dual Speed, High Efficiency Fan Cooling
• 350W per channel @ 70.7V, 240W per channel @ 8 Ohm
capability
• Short circuit, temperature and DC offset protection
• Rear mounted stepped attenuators
• Stereo/Parallel and Bridge Mono Operating Modes
• Balanced Inputs on Barrier Strip and XLR Connectors
• Dual Speed, High Efficiency Fan Cooling
• 350W per channel @ 70.7V, 240W per channel @ 8 Ohm
GENERAL DESCRIPTION
The Atlas Sound CP700 is a high power dual channel
amplifier with independent internal power supplies,
providing excellent channel separation and low distortion.
Rear mounted stepped attenuators provide gain setting
repeatability and ease of setup. Front panel mounted
indicators provide status of signal present, limiter operation,
and protection circuit operation. In addition to having rear
mounted barrier strips for inputs and outputs for permanent
installations, the Atlas Sound CP700 also has XLR input
connectors for portable sound equipment use. In Bridge
Mono mode, the CP700 can provide 140V/200V operation
for long, speaker lines and large speaker loads. Large
torroidal output transformers (1 per channel) provide
outstanding isolation for commercial applications.
amplifier with independent internal power supplies,
providing excellent channel separation and low distortion.
Rear mounted stepped attenuators provide gain setting
repeatability and ease of setup. Front panel mounted
indicators provide status of signal present, limiter operation,
and protection circuit operation. In addition to having rear
mounted barrier strips for inputs and outputs for permanent
installations, the Atlas Sound CP700 also has XLR input
connectors for portable sound equipment use. In Bridge
Mono mode, the CP700 can provide 140V/200V operation
for long, speaker lines and large speaker loads. Large
torroidal output transformers (1 per channel) provide
outstanding isolation for commercial applications.