SRS Labs WT01-15A1 User Manual
68
Situation
Solution
No picture and sound.
•
Connect the power cord properly.
•
Press the POWER button on the control
panel or remote control.
panel or remote control.
•
Press the SOURCE button to cycle through
connected video sources.
connected video sources.
•
Press CH UP or CH DOWN to switch to
other TV stations.
other TV stations.
•
Check the TV/CATV OSD settings. See
“TV/CATV” on page 46.
“TV/CATV” on page 46.
•
Make sure all cables are connected prop-
erly.
erly.
No picture, or poor picture, sound is OK.
•
Check the antenna and cable connections.
•
Adjust the brightness in the OSD menus.
See “Brightness” on page 32.
See “Brightness” on page 32.
Picture is not in color.
•
Adjust the saturation in the OSD menus.
See “Saturation” on page 42.
See “Saturation” on page 42.
Picture is OK, no sound.
•
Press the VOL UP button on the control
panel or remote control.
panel or remote control.
•
Make sure the MTS option is set to Main or
Dual. See “MTS” on page 47.
Dual. See “MTS” on page 47.
One of the speakers has no sound.
•
Adjust the balance in the OSD menus. See
“Balance” on page 37.
“Balance” on page 37.
Can’t receive some TV channels using
cable TV.
cable TV.
•
Try the Auto Program function in the OSD
“TV Setting” menu. See “Auto Program” on
page 49.
“TV Setting” menu. See “Auto Program” on
page 49.
Want to reset TV settings.
•
Use the Reset function in the OSD menu.
Cannot operate menus.
•
If OSD items are colored in light blue, the
system is in a state such that those settings
are not available.
system is in a state such that those settings
are not available.
No image but have sound.
•
Make sure the video signal cable is con-
nected properly.
nected properly.
13
Troubleshooting