Raritan Computer DOMINION KX II-101 User Manual
KX II-101 Quick Setup Guide
3
QSG-DKX2-101-v2.40-0C-E
y 255-62-3061-00
•
For standard AC power, plug the included AC power
adaptor kit into the Power port and plug the other end into
a nearby AC power outlet.
adaptor kit into the Power port and plug the other end into
a nearby AC power outlet.
•
For PoE, attach a 10/100Mbps cable to the LAN port and
plug the other end into a PoE-provisioned LAN.
plug the other end into a PoE-provisioned LAN.
After the KX II-101 is powered ON, it goes through a boot-up
sequence, during which the blue Raritan-logo LED will blink
for about 45 seconds. Upon successful boot-up, the back-lit
LED remains lit.
sequence, during which the blue Raritan-logo LED will blink
for about 45 seconds. Upon successful boot-up, the back-lit
LED remains lit.
Target Server
The KX II-101 can use either the included USB cable or
integrated PS/2 cables to connect to the target server. Before
connecting, configure your target server's video to a supported
resolution.
integrated PS/2 cables to connect to the target server. Before
connecting, configure your target server's video to a supported
resolution.
Note: For PS/2 configurations that require virtual media
connectivity, the USB connector is also necessary.
connectivity, the USB connector is also necessary.
Note: To ensure the best connectivity using a USB cable, only
use the USB cable provided with the KX II-101.
use the USB cable provided with the KX II-101.
USB Configuration
Diagram key
Target server
USB connection
from the target
server to the mouse.
from the target
server to the mouse.
Included mini-USB
to USB cable from
the KX II-101 to the
target server.
to USB cable from
the KX II-101 to the
target server.
USB connection
from the target
server to the
keyboard.
from the target
server to the
keyboard.
KX II-101
Video connection to
the local monitor.
the local monitor.
Diagram key
Local monitor,
keyboard, and
mouse.
keyboard, and
mouse.
Note: 1, 2 and 3 are required if local access to the target is
required.
required.
Note: B also requires an integrated PS2 keyboard, video
and mouse cable, with only the video connected.
and mouse cable, with only the video connected.
To configure the KX II-101 for use with a USB target
server:
server:
1. Connect the mini-USB connector to the KX II-101 and the
USB connector to a USB port on the target server.
2. Use the attached video cable to connect the KX II-101 to
the target video port.
3. Use the optional PS/2 DKX2-101-LPKVMC cabling to
attach only the local video to the Local User port of the KX
II-101. Sold Separately
II-101. Sold Separately
Note: The KX II-101 must be powered for the Local User
port to function.
port to function.
4. Use USB cables to connect the keyboard and mouse
directly to the target server.
To configure the KX II-101 for use with a USB target
server:
server:
1. Connect the mini-USB connector to the KX II-101 and the
USB connector to a USB port on the target server.
2. Use the attached video cable to connect the KX II-101 to
the target video port.
3. Use the optional PS/2 DKX2-101-LPKVMC cabling to
attach only the local video to the Local User port of the KX
II-101. Sold Separately
II-101. Sold Separately
Note: The KX II-101 must be powered for the Local User
port to function.
port to function.
4. Use USB cables to connect the keyboard and mouse
directly to the target server.
To configure the KX II-101 for use with a USB target
server:
server:
1. Connect the mini-USB connector to the KX II-101 and the
USB connector to a USB port on the target server.
2. Use the attached video cable to connect the KX II-101 to
the target video port.
3. Use the optional PS/2 DKX2-101-LPKVMC cabling to
attach only the local video to the Local User port of the KX
II-101. Sold Separately
II-101. Sold Separately
Note: The KX II-101 must be powered for the Local User
port to function.
port to function.
4. Use USB cables to connect the keyboard and mouse
directly to the target server.