Raritan Computer Home Theater Server KX2101-v2.20-0B-E User Manual

Chapter 6: Device Management 
 

Use the following cable connection configuration to connect the KX II-
101 to a modem: 

1. Connect an admin serial cable to the KX II-101. 

2. Connect a 9 pin male/male gender changer to the admin serial cable. 

3. Connect a null modem cable to other side of the gender changer. 

4. Connect the 9 pin male/male gender changer to other end of the null 
modem cable. 

5. Connect a DB9 to male DB25 modem cable between the null modem 
cable and the modem. 

 

Use the Date/Time Settings page to specify the date and time for the KX 
II-101. There are two ways to do this: 

• 

Manually set the date and time. 

• 

Synchronize the date and time with a Network Time Protocol (NTP) 
server. 

 

1.  Choose Device Settings > Date/Time. The Date/Time Settings page 

opens. 

2.  Choose your time zone from the Time Zone drop-down list. 

3.  To adjust for daylight savings time, check the "Adjust for daylight 

savings time" checkbox. 

4.  Choose the method you would like to use to set the date and time: 

ƒ  User Specified Time - Choose this option to input the date and 

time manually. 

For the User Specified Time option, enter the date and time. For 
the time, use the hh:mm format (using a 24-hour clock). 

ƒ  Synchronize with NTP Server - Choose this option to synchronize 

the date and time with the Network Time Protocol (NTP) Server. 

5.  For the Synchronize with NTP Server option: 

a.  Enter the IP address of the Primary Time server. 

b.  Enter the IP address of the Secondary Time server. Optional