Raritan Computer Home Theater Server KX2101-v2.20-0B-E User Manual
Chapter 6: Device Management
155
Port type
Description
PowerStrip Power
strip
KVM KVM
target
1. Click the Port Name for the port you want to edit.
For KVM ports, the Port page is opened. In this page, you can
name the ports, create power associations, and set target server
settings.
settings.
For power strips, the Port page for power strips is opened. In this
page, you can name the power strips and their outlets. See
Power Control
(on page 157).
Note: The Power Port 1 link is enabled only when a Raritan power
strip is connected to the KX II-101 and configured. Otherwise, the
link is disabled.
strip is connected to the KX II-101 and configured. Otherwise, the
link is disabled.
Managing KVM Target Servers (Port Page)
This Port page opens when you select a port from the Port Configuration
page that is connected to a target server. From this page, you can make
a power associations and change the Port Name to something more
descriptive.
page that is connected to a target server. From this page, you can make
a power associations and change the Port Name to something more
descriptive.
A server can have up to four power plugs that you can associate with the
power strip. In this page, you can define those associations so that you
can power on, power off, and power cycle the server from the Port
Access page, as shown below.
power strip. In this page, you can define those associations so that you
can power on, power off, and power cycle the server from the Port
Access page, as shown below.
Note: To use this feature, you must have a Raritan Dominion PX power
strip attached to the device. See
strip attached to the device. See
Connecting the Power Strip
(on page
157).
To access a port configuration:
1. Choose Device Settings > Port Configuration. The Port Configuration
page opens.
2. Click the Port Name for the port you want to edit.