Raritan Computer Home Theater Server KX2101-v2.20-0B-E User Manual

Chapter 2: Installation and Configuration

GUI Resolution/64 Bit

To check the GUI resolution on 64 bit cards:

1. Run the following command: # /usr/sbin/m64config –prconf

To change the resolution on 64 bit cards:

1. Run the following command: # /usr/sbin/m64config –

res1024x768x75 where 1024x768x75 is any resolution that the KX II-
101 supports.

2. Restart the computer.

GUI Resolution/Solaris 8

To check the resolution on Solaris 8 for 32 bit and 64 bit cards:

1. Run the following command: # /usr/sbin/fbconfig –prconf

To change the resolution on Solaris 8 for 32 and 64 bit cards:

1. Run the following command: # /usr/sbin/fbconfig –res1024x768x75

where 1024x768x75 is any resolution that the KX II-101 supports.

2. Restart the computer.

Mouse Modes

The KX II-101 operates in several mouse modes: Absolute Mouse
Synchronization™, Intelligent Mouse mode (do not use an animated
mouse), and Standard Mouse mode.

Mouse parameters do not have to be altered for Absolute Mouse
Synchronization. For both the Standard and Intelligent Mouse modes,
mouse parameters must be set to specific values, which are described in
this section.

Mouse configurations will vary on different target operating systems.
Consult your OS documentation for additional details.

Windows 2000® Settings

To configure the mouse:

1. Choose Start > Control Panel > Mouse.

2. On the Motion tab, set the acceleration to None and set the mouse

motion speed setting to exactly the middle speed. Click OK.

To disable transition effects:

1. Select the Display option from Control Panel.

2. On the Effects tab, deselect the Use the following transition effect for

menus and tooltips checkbox. Click OK.