Raritan Computer Home Theater Server KX2101-v2.20-0B-E User Manual

Page of 263
Appendix D: Informational Notes 
 
248
 
 
Keyboard 
Configuration to use 
Dell Dimension 
2400– BIOS A05 
Set the Host Interface to PS/2 on the 
Keyboard/Mouse Setup page. See 
Keyboard/Mouse Setup
 (on page 143). 
Dell Optiplex 170L 
- BIOS A07 
PS/2 plus a PS/2-to-USB-adapter. 
Set the Host Interface to PS/2 on the 
Keyboard/Mouse Setup page. See 
Keyboard/Mouse Setup
 (on page 143). 
Dell Server 1850 
In order for BIOS version A06 to recognize a 
virtual media mounted removable USB flash drive, 
use the PS/2 and USB connections between the 
Dell server and the KX II-101. 
Set the Host Interface to PS/2 on the 
Keyboard/Mouse Setup page. See 
Keyboard/Mouse Setup
 (on page 143). 
 
 
HP UX RX 1600 Keyboard and Mouse Configuration 
If you are using an HP UX RX 1600 running UNIX, do the following to 
connect the device to the target: 
• 
Verify you are using KX II-101 firmware 2.0.20.5.6964 or higher. 
• 
Use the USB cable that is supplied with the KX II-101 .  
• 
Set the Host Interface field on the Keyboard/Mouse Setup page to 
USB. See 
Keyboard/Mouse Setup
 (on page 143). 
• 
Verify that the Enable Absolute Mouse and Use Full Speed 
checkboxes on the Port page are not selected. See 
Port 
Configuration
 (on page 154). 
• 
Use either Intelligent or Standard Mouse mode. Do not use Absolute 
Mouse mode. 
 
Compaq Alpha and IBM P Server Mouse Mode Limitation 
When connecting to either Compaq Alpha servers or IBM P servers 
through the KX II-101, you must use Single Mouse mode. See 
Working 
with Target Servers