Raritan Computer Home Theater Server KX2101-v2.20-0B-E User Manual

Chapter 3: Working with Target Servers 
 

Use the Calibrate Color command to optimize the color levels (hue, 
brightness, saturation) of the transmitted video images. The KX II-101 
color settings are on a target server-basis. 

 

• 

Choose Video > Calibrate Color or click the Calibrate Color button 

 in the toolbar. The target device screen updates its color 

calibration. 

 

Use the Video Settings command to manually adjust the video settings. 

 

1.  Choose Video > Video Settings or click the Video Settings button 

 in the toolbar to open the Video Settings dialog.  

2.  Adjust the following settings as required. As you adjust the settings 

the effects are immediately visible:  

a. Noise 

Filter 

The KX II-101 device can filter out the electrical interference of 
video output from graphics cards. This feature optimizes picture 
quality and reduces bandwidth. Higher settings transmit variant 
pixels only if a large color variation exists in comparison to the 
neighboring pixels. However, setting the threshold too high can 
result in the unintentional filtering of desired screen changes. 
Lower settings transmit most pixel changes. Setting this 
threshold too low can result in higher bandwidth use. 

b.  Brightness: Use this setting to adjust the brightness of the target 

server display. 

c.  Brightness Red - Controls the brightness of the target server 

display for the red signal. 

d.  Brightness Green - Controls the brightness of the green signal. 

e.  Brightness Blue - Controls the brightness of the blue signal. 

f. 

Contrast Red - Controls the red signal contrast. 

g.  Contrast Green - Controls the green signal. 

h.  Contrast Blue - Controls the blue signal.