Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. STR-DH520
  5. Operating Guide

Sony STR-DH520 Operating Guide

Download
Page of 72
36
GB
D:\NORM'S JOB\SONY HA\SO0109\STR-DH520\4263361111_GB\GB05BAS_STR-DH520-
U2.fm
masterpage: Left
STR-DH520
4-263-361-11(1)
4
Press 
V/v repeatedly to select 
“AUTO xxx*”. 
The test tone is output from each speaker 
in sequence.
* xxx represent a speaker channel.
Note
Depending on the speaker pattern settings, test 
tone may not be output from all speakers even 
though you selected “AUTO xxx”. 
5
Adjust the speaker levels.
Use the LEVEL menu (page 54) to adjust 
the speakers to have the same sounding 
test tone level for each speaker.
Tips
• To adjust the level of all speakers at the same 
time, press MASTER VOL +/– or 
2
 +/–. You 
can also use MASTER VOLUME on the 
receiver.
• The adjusted value are shown on the display 
panel during adjustment.
6
Exit test tone.
Press any input buttons or select “OFF” 
under step 4.
When a test tone is not output 
from the speakers
• The speaker cords may not be connected 
securely.
• The speaker cords may have the short-circuit 
problem.
When a test tone is output from 
a different speaker than the 
speaker indicator showed in the 
display panel
The speaker pattern set up is incorrect. Make 
sure that the speaker connections and the 
pattern match correctly.
Playback
1
Turn on the connected 
equipment.
2
Turn on the receiver.
3
Press the input button which 
corresponds to the equipment 
you want.
You can also use INPUT SELECTOR on 
the receiver.
The selected input appears on the display 
panel.
Note
When you press TUNER, “FM TUNER” or 
“AM TUNER” appears for a while, and then 
frequency appears on the display panel.
Basic Operations
Input 
buttons
,
 
V/v/B/b
AMP 
MENU
MASTER 
VOL +/–/
2
 +/–
MUTING/
SOUND 
FIELD +/–