Sony STR-DH520 Operating Guide
51
GB
D:\NORM'S JOB\SONY HA\SO0109\STR-DH520\4263361111_GB\GB08ADV_STR-DH520-
U2.fm
U2.fm
masterpage: Right
STR-DH520
4-263-361-11(1)
A
d
v
a
n
c
ed
O
p
O
p
e
rati
o
o
n
s
Switching between
digital and analog audio
digital and analog audio
(INPUT MODE)
When you connect equipment to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
1
Press input button to select the
input source.
input source.
You can also use the INPUT SELECTOR
on the receiver.
on the receiver.
2
Press INPUT MODE repeatedly.
The selected audio input mode appears on
the display panel.
• AUTO: Gives priority to digital audio
the display panel.
• AUTO: Gives priority to digital audio
signals when there are both digital and
analog connections.
analog connections.
If there are more than one digital
connection, HDMI audio signals have
priority.
connection, HDMI audio signals have
priority.
If there are no digital audio signals,
analog audio signals are selected.
analog audio signals are selected.
When TV input is selected, priority is
given to the Audio Return Channel
(ARC) signals. If your TV is not
compatible with the Audio Return
Channel (ARC) function, the digital
optical audio signals are selected.
given to the Audio Return Channel
(ARC) signals. If your TV is not
compatible with the Audio Return
Channel (ARC) function, the digital
optical audio signals are selected.
• COAX: Specifies the digital audio
signals input to the DIGITAL
COAXIAL jack.
COAXIAL jack.
• OPT: Specifies the digital audio signals
input to the DIGITAL OPTICAL jack.
• ANALOG: Specifies the analog audio
signals input to the AUDIO IN (L/R)
jacks.
jacks.
Notes
• Some audio input modes may not be set up based
on the input.
• When “A. DIRECT” is being used, audio input is
set to “ANALOG”. You cannot select other modes.
• The Audio Return Channel (ARC) function does
not work in the following cases.
– Your TV is not compatible with the Audio
– Your TV is not compatible with the Audio
Return Channel (ARC) function.
– “CTRL.HDMI” is set to “CTRL OFF”.
– When you do not connect the receiver to the
– When you do not connect the receiver to the
ARC compatible TV’s HDMI jack via an HDMI
cable.
cable.
Using the sound/images
from other inputs
from other inputs
You can reassign the HDMI, COMPONENT
VIDEO and DIGITAL input jacks to other
input if the default settings of the jacks do not
correspond to your connected equipment.
After you have reassigned the input jacks, you
can use the input button (or INPUT
SELECTOR on the receiver) to select the
equipment you connected.
Example:
When you connect the DVD player to the
OPTICAL SAT/CATV IN and
COMPONENT VIDEO SAT/CATV (IN 2)
jacks.
– Assign the OPTICAL SAT/CATV IN jack to
VIDEO and DIGITAL input jacks to other
input if the default settings of the jacks do not
correspond to your connected equipment.
After you have reassigned the input jacks, you
can use the input button (or INPUT
SELECTOR on the receiver) to select the
equipment you connected.
Example:
When you connect the DVD player to the
OPTICAL SAT/CATV IN and
COMPONENT VIDEO SAT/CATV (IN 2)
jacks.
– Assign the OPTICAL SAT/CATV IN jack to
“BD/DVD”
– Assign the COMPONENT VIDEO
SAT/CATV (IN 2) jacks to “BD/DVD”
Note
Before you reassign the HDMI input jacks, be sure
to set “CTRL.HDMI” to “CTRL OFF”.
to set “CTRL.HDMI” to “CTRL OFF”.
1
Press AMP MENU.
2
Press
V/v repeatedly to select
“AUDIO”, “VIDEO” or “HDMI”,
then press
then press
or
b.
Advanced Operations
continued