Vupoint Solutions PDS-ST510-VP Leaflet

 

 
 

 

600/300 dpi resolution scan selection   
Directly save JPEG file to microSD/microSDHC card 
Supports microSD/microSDHC card up to 32GB 
Driver free to download for Windows

® XP, Windows® Vista™,   

Windows® 7 and Mac OS® 10.4 or above 
(direct plug-in, driver installation not required) 

   

 

 

 

Resolution 

Select High(600dpi) / Low(300dpi) resolution;   
High  /  Low  resolution  mode  icon  will  be  displayed  on 
status LCD screen. 

Stitch file 

Create new folder for file storage. 

Power button 

Power On/Off: Switch this key left or right to turn 
scanner on or off. 

Scan 

In power on mode, press this button to start scanning, 
press this button again to stop scanning 

Scan LED indicator 

Ready for scan: Green LED on 

Error LED indicator 

Over speed: Red LED on 

LCD screen 

Scanning status display 

SF LED indicator 

Stitch file: White LED on 

Battery door 

For 4.2V rechargeable battery 

microSD card slot 

microSD/microSDHC card storage location. 

USB interface 

Download photo to a computer via USB cable provided. 

Time set 

Press to enter Time and Date setting mode 

Format button 

Press this button to format the microSD/SDHC card. 

 

 

SD card indicator 

    Photos will be stored in microSD card 

Battery indicator 

  Battery is full   

  Empty battery 

Counting indicator 

Show scanned files in microSD card 

Selected resolution 

High:600 dpi / Low:300 dpi 

 

1. 

Before first using the scanner, it is recommended to charge the battery for 6-8 hours.   

2. 

To charge, connect the scanner to a (1) USB 2.0 port or (2) an outlet with the power 
adapter included. When charging, “Err” (Error) red light will be lit and will turn off once 
the battery is fully charged. 

Note: Do not remove the battery from the battery compartment. 

 
 

To operate the scanner, you must insert a microSD Card (not supplied) to record and store your 
pictures. Inserting the microSD memory card: 

1. 

Turn OFF the scanner. 

2. 

Insert the microSD card into the microSD card slot (with metal side facing upwards). 

Gently press in until card is clicked in and latched. The SD card indicator 

  must 

appear on the LCD screen. 

Note: Do not force the card into the slot; forcing may damage scanner and the microSD memory 

card. Align microSD card position (as marked) and try again. 

 

 

 

4.3    Time setting 

1. 

Press [TIME SET] button to enter time setting mode by using a thin, blunt object, such 
as a paperclip to access the button. The LCD screen will read 

“1##” (step 1) for the year. 

“##” is a set of number that would be changed to correspond to the actual time/date 
setting. The numbers 1-

5 in front of “##” indicates each step in the settings. 

2. 

Press the [STITCH FILE] or [DPI] buttons to select the current Year.   

3. 

Press [SCAN] button to confirm setting

. The LCD screen will now read “2##.”     

4. 

Repeat steps 2 and 3 to select the Month, Date, Hour, and Minute.   

 

1## 

Year 

2## 

Month 

3## 

Date 

4## 

Hour 

5## 

Minute 

 
5 

After setting the 

Minute, “5##”, press the [TIME SET] button again to complete the Time 

and Date setting. 

Note: Formatting the microSD is recommended but not necessary. All contents on the microSD 

card will be erased during formatting. 

1. 

Insert a microSD card into the scanner with metal side facing upwards. Then power on 
the scanner. 

2. 

Press the [FORMAT] button with a thin, blunt object, such as the end of a paperclip to 
ac

cess the button. An “F” shows on the LCD screen. 

3. 

Press the [SCAN] button once to begin formatting microSD card. 

4. 

The microSD card indicator will blink until the formatting process is complete.     

Note: Perform calibration only when white balance needs adjustment. 

1. 

Turn on the scanner by sliding the [POWER] button to ON. Then place the scanner on 
the provided “White Balance Calibration” paper. 

2. 

Click and hold onto the [STITCH FILE] button. While holding onto the [STITCH FILE] 

button, press the [SCAN] button once and then release both buttons. SD symbol 

  will 

flash and “GREEN” and “RED” LED light will turn on. 

3. 

Do not move the scanner. Wait until the “RED” LED light turns off. “GREEN” LED light 
will stay on. 

4. 

With only the “GREEN” LED light on, start scanning the white paper by sliding the 
scanner across the paper until the “GREEN” LED light turns off. (Slide the scanner 
backwards if necessary).   

5. 

Slide the [POWER] button to OFF to turn off the scanner. Calibration is complete. 

1. 

By pressing the [DPI] resolution button on the scanner, you may choose between high 
resolution (600 dpi) and low resolution (300 dpi).   

2. 

The high or low resolution mode will be displayed on the LCD screen to reflect your 
choice. 

 

To group scanned files into a new folder within the microSD card use the Stitch file function.   

1. 

Press the [STITCH FILE] button to create a new folder within the microSD card for files 
storage. SF white LED light will turn on.   

2. 

Then scan your documents. Your files will be saved into the new folder. 

3. 

To save another new set of scans in another folder, press the [STITCH FILE] button 
again to generate a new folder.   

 
For free optional stitching software, please download the program from the following link:   
http://research.microsoft.com/en-us/um/redmond/groups/ivm/ice/ 

 
 

1. 

Turn on the scanner by sliding the [POWER] button to ON. 

2. 

Place the document on a flat surface and hold down the document with one hand. 

3. 

Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch onto the 
paper to ensure the most of the document can be scanned. Make sure to keep the 
scanning area in between the scanning width indicator marked on the side of the 
scanner. 

 
 
 
 
 
 
 
 
 
 
 

4. 

Hold the scanner flat against the material and then press the [SCAN] button once.

 

 

 

 
5. 

Slide the scanner slowly, keeping you hand stable to get the best quality picture.   

6. 

Press the [SCAN] button again to stop scanning. 

 

“

GREEN” SCAN LED ON   

    Scan in progress. 

“

GREEN” SCAN LED OFF 

    Standby / Scan is complete. 

---------------------------------------------------------------------------------------------------- 

     

“

RED” ERROR LED ON     

 

Scanning too fast. 

May cause scanning error. 
Restart and scan again. 

 

“

RED” ERROR LED OFF 

   

No error in scanning speed. 
Continue scanning process. 

“WHITE” SF LED ON/OFF   

    A new folder created.

 

﹡

Scan will START when

 

button is pressed 

﹡To END scan, press 

  button again