Zoom H2 User Manual

 

The steps for recording and playback are as
follows.

 

With the stereo mode top screen shown on the
display, press the 

 

5

 

 (REC) key to set the H2

to recording standby.

 

Press the 

 

5

 

 (REC) key once more. The

[PLAY/REC] indicator on the front panel is
now constantly lit in red, and the counter on
the display indicates the progress of the
recording.

 

To stop recording, press the 

 

5

 

 (REC) key.

The [PLAY/REC] indicator goes out. When
you stop recording, the counter of the H2
returns to the beginning, and you can start
playback from that point.

 

To check the recorded content, press the 

 

1

 

(PLAY/PAUSE) key. During playback, the
[PLAY/REC] indicator is lit in green. Press
the key once more to stop playback.

 

Use the following procedure to turn the H2
off.

 

→

 

After verifying that the monitor system is off,
turn the H2 off by sliding the [POWER]
switch into the OFF position. 
The indication "GoodBye See You!" is shown
briefly on the display before the unit goes off.
A l l   s e t t i n g s   a n d   o t h e r   i n f o r m a t i o n   a r e
automatically stored on the SD card at this
point.

 

Always use the [POWER] switch to turn the H2 
on and off. Never disconnect the AC adapter 
while power is on because this can lead to 
data loss.

H2-E.fm 17 ページ ２００７年７月１１日　水曜日　午後３時１９分