Zoom H2 User Manual
ZOOM H2
71
Connecting the H2 to a Computer
Connecting the [USB] port of the H2 to a computer allows use of the H2 as a card reader or audio
interface.
When used as a card reader, the SD card inserted in the H2 can be accessed directly from the
computer.
When used as an audio interface, the input signal of the H2 can be recorded directly by the
computer, or an output signal from the computer can be played back via the H2.
interface.
When used as a card reader, the SD card inserted in the H2 can be accessed directly from the
computer.
When used as an audio interface, the input signal of the H2 can be recorded directly by the
computer, or an output signal from the computer can be played back via the H2.
Using the H2 as a card
reader
When you connect the [USB] port of the H2 to
a computer, the H2 will be recognized as card
reader, and the SD card inserted in the H2 can
be accessed directly from the computer. This
lets you easily copy your recordings to the
computer for further editing or burning to an
audio CD.
a computer, the H2 will be recognized as card
reader, and the SD card inserted in the H2 can
be accessed directly from the computer. This
lets you easily copy your recordings to the
computer for further editing or burning to an
audio CD.
The environment requirements for using the
H2 as a card reader are as follows.
H2 as a card reader are as follows.
■
Supported operating systems
•Windows XP
•Windows Vista
•MacOS X (10.2 or later)
•Windows Vista
•MacOS X (10.2 or later)
1.
Connect the H2 and the
computer.
computer.
Connect the [USB] port (Mini USB) of the H2
to a USB port on the computer, using a USB
cable. If you connect the [USB] port to the
computer while the H2 is off, the H2 can be
started on USB bus power. In this case the
USB menu of step 3 comes up automatically
and you can skip steps 2 and 3.
to a USB port on the computer, using a USB
cable. If you connect the [USB] port to the
computer while the H2 is off, the H2 can be
started on USB bus power. In this case the
USB menu of step 3 comes up automatically
and you can skip steps 2 and 3.
2.
Bring up the main menu screen.
At the stereo mode or 4-channel mode top
screen, press the
screen, press the
4
(MENU) key.
3.
Bring up the USB screen.
Repeatedly press the
3
(REW)/
2
(FF)
keys to move the cursor to "USB" and press
the
the
5
(REC) key.
4.
Have the H2 recognized by the
computer.
computer.
To have the H2 recognized as a card reader by
t h e c o m p u t e r , m o v e t h e c u r s o r t o
"STORAGE" and press the
t h e c o m p u t e r , m o v e t h e c u r s o r t o
"STORAGE" and press the
5
(REC) key.
The computer and the H2 go into the online
condition and the display changes as follows.
condition and the display changes as follows.
H2-E.fm 71 ページ ２００７年７月１１日 水曜日 午後３時１９分