Zoom H2 User Manual
Other Functions
ZOOM H2
79
5.
Return to the top screen.
Repeatedly press the
4
(MENU) key until
the stereo mode or 4-channel mode top screen
appears again.
appears again.
NOTE
If you remove the batteries while no AC
adapter is connected to the H2, the date and
time setting of the internal clock will be reset
after about 1 to 2 minutes. When you turn on
the H2 the next time, a reminder message will
inform you of this.
adapter is connected to the H2, the date and
time setting of the internal clock will be reset
after about 1 to 2 minutes. When you turn on
the H2 the next time, a reminder message will
inform you of this.
Using the monitor function
When the H2 is in the default condition, the
unit must be set to the recording standby or
recording condition to enable input signal
level monitoring.
If required, the H2 can be set up to always
monitor the input signal.
unit must be set to the recording standby or
recording condition to enable input signal
level monitoring.
If required, the H2 can be set up to always
monitor the input signal.
1.
Bring up the main menu screen.
At the stereo mode or 4-channel mode top
screen, press the
screen, press the
4
(MENU) key.
2.
Bring up the MONITOR screen.
Repeatedly press the
3
(REW)/
2
(FF)
keys to move the cursor to "MONITOR" and
press the
press the
5
(REC) key.
At this screen, you can turn input signal
monitoring on and off.
monitoring on and off.
●
ON
The input signal is always monitored.
●
OFF
The input signal is monitored only during
recording standby and recording.
recording standby and recording.
3.
Select the desired setting.
Use the
3
(REW)/
2
(FF) keys to select
the setting and press the
5
(REC) key. The
setting is accepted and the main menu appears
again.
again.
H2-E.fm 79 ページ ２００７年７月１１日 水曜日 午後３時１９分