Shindaiwa EC7600 User Manual

24

The engine does not start.

Remove the spark plug (pg 13).

Is the spark 

plug wet?

Cutting performance is poor.

Make sure the choke is 

pushed fully in.

Make sure the air 

cleaner is clean (pg 17).

Make sure the drive belt is 

properly tightened (pg 19).

Make sure the carburetor is 
is properly adjusted (pg 18).

Make sure the cut-off wheel is 

appropriate for your work.

Make sure the diamond 

wheel is sharp.

Dry the 

spark plug.

Inspect the 
spark plug 

(pg 19). 

Pull the recoil 

starter several 

times to 

remove fuel 

from the 
cylinder.

If the above inspections and maintenance procedures do not 

correct the problem, contact your Shindaiwa dealer for assistance.

Make sure the fuel tank contains 

with clean, fresh fuel (pg 11). 

Is the spark 

plug dry?

Replace the 

fuel filter 

(pg 22).