Brother MA4-B551 Owner's Manual
126
Programmer
Chapter 3 Programming with Command Function
Copying in the reverse direction
Moving data in parallel before the current needle position (changing the moving
amount data of the needle position)
amount data of the needle position)
Moving data in parallel after the current needle position (using needle drop data to
the moved position)
the moved position)
Setting attribute
Setting the number of feed boundaries to be ignored (0 - 99)
Stopping the needle at the upper end (only when the needle position is at split)
Stopping the needle at the lower end (only when the needle position is at split)
The maximum sewing speed becomes 400 rpm or lower.
The maximum sewing speed becomes 1200 rpm or lower.
The maximum sewing speed becomes 800 rpm or lower.
The maximum sewing speed becomes 600 rpm or lower.
Cancels low speed data setting
Turns on option output 1.
Turns on option output 2.
Turns on option output 3.
Turn off all option outputs.
Not breaking thread for feed (only when the needle position is at feed)
Breaks thread for feed (only when the needle position is at feed)
Other operations
Returning from pattern image to the setting screen.
Returning from error message to the previous screen.
Returning from error message to the previous screen.
Displaying data image
Turning on (off) the programmer
Canceling command