Brother HS-3000 Quick Setup Guide
4. Press .
5. The pattern selection screen for the inserted
memory card is displayed. [The illustration at
the left shows the Transportation card No.2
(part code SA299, X58321-001) (optional).]
the left shows the Transportation card No.2
(part code SA299, X58321-001) (optional).]
Note
If the screen shown at the left is not displayed,
press the EMBROIDERY key before pressing
.
6. Select the desired pattern in the same way as
3. Set the main power switch to “I” to turn on the
sewing machine.
CAUTION
–
–
Do not insert the card in any direction
other than that described above, and do
not force it into the slot, otherwise the
card or the machine may be damaged.
other than that described above, and do
not force it into the slot, otherwise the
card or the machine may be damaged.
–
When the card is inserted, it should appear
as shown in the illustration at the left.
Trying to push the card in any further will
damage the connector.
as shown in the illustration at the left.
Trying to push the card in any further will
damage the connector.
–
Always turn off the main power switch
before inserting or removing the
embroidery card (memory card).
before inserting or removing the
embroidery card (memory card).
–
Always keep the memory card in its case
when it is not being used.
when it is not being used.
103