Brother HS-3000 Quick Setup Guide

118

6. Use the arrow keys to align the needle with

the point where the reference lines cross
each other, and then begin embroidering.

2

Do not cut the thread after embroidering
"ABCDEF".

7. Remove the embroidery frame, and then re-

attach it to the embroidery arm at the bottom
installation position.

8. Erase "ABCDEF", and then type in "GHIJK".

9. Position the frame so that the pattern will be

embroidered correctly by pressing the

LAYOUT key, pressing 

so that it

appears as 

then using the arrow keys to align the needle

with the last stitch of "ABCDEF" (refer to

3

Last stitch after embroidering "ABCDEF"

3. Stretch the fabric between the inner and

outer embroidery frames while making sure
that the reference lines on the embroidery
sheet remain aligned with reference lines for
the design drawn on the fabric. Then, attach
the embroidery frame to the embroidery arm
at the top installation position. (Refer to
pages 90 - 92 for more details on attaching
the embroidery frame.)

1

Top installation position

4. Select a medium size font and type in

"ABCDEF". 

5. Rotate the pattern so that it is positioned

vertically by pressing the SET key, then

LAYOUT key, and then pressing 

so

that it appears as 

Press 

so that it appears as 

.