Brother HS-3000 Quick Setup Guide

46

2

3

1. Attach presser foot J, sew straight stitches up to the  zipper

opening, and then sew reverse stitches. Then, select a
basting stitch and continue sewing to the edge of the fabric.

1

End of zipper opening

2

Reverse stitches

3

Basting stitch

4

Wrong side of fabric

2. Press open the seam allowance, and then use the basting

stitch to baste the zipper in place.

1

Zipper

2

Basting

3

Wrong side of fabric

3. Press [Straight (Mid)], and then press 

(presser

foot I). The thread tension automatically adjusts for presser

foot I.

If you pressed 

then ZIPPER INSERTION, the thread

tension is automatically adjusted.

5

3

4. Attach the presser foot holder to the right pin of presser foot

I, and topstitch around the zipper 25/64" (1.0 cm) from the
edge of the pressed edge.

1

Presser foot holder attached to right pin of presser foot I

2

Right side of fabric

5. Remove the basting.

1

Straight (Mid) [straight stitch (center needle position)]

I

1