Brother HS-3000 Quick Setup Guide

6. Insert the fabric and inner frame back into the outer frame

without allowing the embroidery sheet or the fabric to move
out of place.

1

Outer frame

2

Inner frame

3

Right side of fabric

Note
Press down firmly until the tops of the outer frame and inner
frame are aligned.

1

7. Tighten the screw by hand.

1

Tighten

Note
To avoid stripping the screw, do not use a screwdriver to tighten
it.

1

2

3

1

8. Check that the center of the pattern has remained in the

correct position, and then remove the embroidery sheet
before starting to embroider.

1

Fingerhole for removing embroidery sheet

91